Scan a product with your smartphone to check if it's safe
(under construction)
Report a faulty or dangerous product
Quick safety checklist, plus useful information on what to do in case you own dangerous products
The battery charger supplied with the lantern poses a risk of electric shock because the insulation is not sufficient and the creepage distance between the live parts of the charger and the accessible connector is too short. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standards EN 60598 and EN 61558.
The product is not sufficiently sensitive with respect to the detection of carbon monoxide. The product does not comply with the relevant European standard EN 50291-1.
The product poses a risk of electric shock for the following reasons. Firstly, the dimensions of the plug are substantially less than required. Secondly, the wire ends soldered to the terminals of the flashing unit and the LEDs are not adequately protected against pulling and twisting. Thirdly, the accessible basic insulated wires can come into contact with sharp edges of the flashing switch and control unit. Finally, the insulation provided by the shrink tubing for the lamps is inadequate.
The dimensions of the plug are too small and the wire ends soldered to the terminals of the flashing unit and the LED are not adequately protected against pulling and twisting. The accessible, basic insulated, wires can come into contact with sharp edges of the flashing switch and control unit. The cross-sectional area of the external and internal wires is too small and the wires could overheat and cause a fire. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60598.
The amount of Chromium (VI) in the leather is too high (measured value: 19.1 mg/kg). Chromium (VI) is sensitising and may trigger allergic reactions. The product does not comply with the REACH Regulation.
The product is not sufficiently sensitive with respect to detection of carbon monoxide. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 50291-1.
The product is not sufficiently sensitive with respect to detection of carbon monoxide. The product does not comply with the relevant European standard EN 50291-1.
The product is not sufficiently sensitive with respect to detection of carbon monoxide. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 50291-1.
The safety lock of the pram is not sufficiently resistant to load and can release, causing the pram to collapse, which may result in a child being injured. In addition, the fingers of a child could be trapped between the moving parts while the pram collapses. The product does not comply with the requirements of the Toy Safety Directive and the relevant European standard EN 71-1.
