Due to the absence of primer when bonding, the sun roof may not be properly attached. Part of the sunroof could consequently detach from the vehicle whilst driving, posing risk for following vehicles.

The front wheel alignment may be incorrect. The lower suspension arm may not be properly fixed and could slip. Possible premature and asymmetrical wear of the front tyres which arises as a result could, in extreme cases, lead to a sudden loss of tyre pressure.

The webbing of the front seat belts may have been partially cut. If this is the case, it could result in a loss of efficiency of the safety belt protection performance in the event of an accident.

Possible incorrect assembly of the left or right front flexible brake hose could lead to wear of the flexible brake hose by fretting on the wheel rim and on the tyre. Possible brake fluid leakage, which results as a consequence, could lead to long brake pedal travel and a decrease of braking efficiency.

The red and yellow paint of the wooden toy contains lead (measured value up to 330 mg/kg). Exposure to lead can result in severe and irreversible neurotoxicity, particularly in the case of children. The product does not comply with the requirements of the the Toy Safety Directive and the relevant European standard EN 71-3.

Deterioration of the inflator propellant’s density can result in abnormal driver airbag deployment in case of an accident causing injuries to the driver.

The outer tube of the gas strut for the rear door may corrode and crack, resulting in the loss of the pressurized gas inside the gas strut. The gas strut would consequently be unable to support the opening of the rear door and could detach from the vehicle during operation of the rear door.

A fault with the steering gear box could lead to the driver not being able to steer the vehicle properly.

The plastic hooks holding the glass shade may break, causing the glass shade to be released. If the glass shade fell on a person, cuts and injuries could result. The product does not comply with the requirements of the Low Voltage Directive.

The IPDM (Intelligent Power Distribution Module) software data file calculating the headlamp aiming position does not correctly adjust the height of headlamp aim when the rear of the vehicle is heavily laden. Other car drivers could be dazzled by the incorrectly positioned light.