During normal airbag deployment, the housing of the passenger airbag inflator may burst open due to excessive pressure inside. If the inflator bursts when the airbag is deployed it could result in passengers being struck by metal fragments.

A material defect in the headlamp can cause a short circuit as a result of which, in the worst case, the engine can cut out while driving.

The engine tappets and cams can wear, increasing the tappet clearances. If the tappet clearance becomes large, it can, in the worst case, cause the engine to stall.

The wiring harness could become damaged where it is in contact with part of the steering column assembly. If this happened, a short circuit may occur. Potential safety-related consequences include deactivation or malfunction of the windscreen wipers, the headlamps, and/or the horn. Engine stalling may also occur.

The inflator case component within the airbag assembly may rupture during passenger airbag deployment. In the event of an inflator rupture, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.

Excessively brittle bolts were installed in certain fittings used for the front and rear wheel hub assemblies. There is consequently a risk of the bolts breaking which could lead to other components being damaged. This could result in the front brake disc breaking or could undermine the stability of the vehicle during braking.

As a result of improper mounting, the BAS (bank angle sensor) wire harness might bend and break due to continuous vibration during riding, causing an engine stall and steering problems for the rider.

An error in the ignition locking system may cause failure of the various electrical systems and of the dashboard instruments which can lead to an accident.

An error in the ignition locking system may cause failure of the various electrical systems and of the dashboard instruments which can lead to an accident.

Corrosion of the ignition lock connecting plug may lead to failure of the electrical system. Incorrect routing of the wiring harness in the tank area may lead to the engine stalling whilst riding. The incorrect positioning of the battery earth connection may lead to starter failure. As a result, the motorcycle may crash.