The cables are not properly secured against pulling and twisting and the wire ends can be pulled out easily. The PVC cables do not protect properly against the penetration of water. As a result of these defects, the user could touch live parts during normal use. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60598.

The pins of the built-in plug and plug adapter do not have an insulating collar. The plug adapter allows single-pole insertion of a plug, leaving the remaining free live pin accessible. The cover for the LED can be removed by hand during charging, leaving live parts accessible. The cross-sectional area of the core of the wires is insufficient: in case of a short circuit the wires may overheat and can cause a fire. The heat and flame resistance of the insulating material that hold the pins of the built-in plug in position is insufficient.

The basic insulated internal wires of the head torch can be damaged by the sharp edges of the cover fixing screws during adjustment of the head torch. The dimensions of the battery charger are not correct and when connecting the plug the user may consequently touch the live parts of the plug or the live connector terminal sockets. The cross-sectional area of the core of the wires is insufficient: in case of a short circuit the wires may overheat.

The drawstring in the hood with free ends could become trapped during various activities of a child causing strangulation. The product does not comply with the relevant European standard EN 14682.

The drawstring in the hood with free-ends could become trapped during various activities of a child, causing strangulation. The product does not comply with the relevant European standard EN 14682.

The pins of the built-in plug and plug adapter do not have an insulating collar. The plug adapter allows single-pole insertion of a plug, leaving the remaining free live pin accessible. The cover for the LEDs can be removed by hand during charging, leaving live parts accessible. The cross-sectional area of the core of the wires is insufficient: in case of a short circuit the wires may overheat and can cause a fire. The heat and flame resistance of the insulating material that hold the pins of the built-in plug in position is insufficient.

The plastic casing is not sufficiently heat-resistant and may overheat and catch fire. Accessible metal parts are separated with only basic insulation from live parts. The live wire ends of the mains cable are not properly secured and could become loose, causing them to become accessible. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standards EN 60335 and EN 61199.

The internal wiring may overheat causing a fire. Accessible metal parts are separated with only basic insulation from live parts. The mains cable is not properly secured against twisting. As a consequence, the cable could become loose causing accessible parts to become live. Furthermore, if an internal short circuit occurred, the fluorescent lamp may explode causing cuts to the user. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standards EN 60335 and EN 61199.

Accessible metal parts are separated with only basic insulation from live parts. The mains cable is not properly secured against twisting. As a consequence, the cable could become loose causing accessible parts to become live. Furthermore, if an internal short circuit occurred, the fluorescent lamp may explode causing cuts to the user. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standards EN 60335 and EN 61199.

The insulation between the primary and the secondary circuit of the charger is not sufficient, which may cause an electric shock. The pins of the converter plug adapter do not have an insulating collar, so when inserting the plug the user may touch the live pins. The plug adapter allows single-pole insertion of the charger, leaving the remaining free live pin accessible. The product does not comply with the requirements of the Low Voltage Directive and the relevant standards EN 60950 and IEC 60884.