Due to a defect in the gas generator of the driver's air bag, deployment of the air bag could result in small metal fragments being released which could injure the occupants.

The product contains chloroform (measured value 40.3% by weight). Chloroform in high doses causes skin irritation and can damage health if inhaled or swallowed. The product does not comply with the REACH Regulation.

A small child may put the small erasers in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive and the relevant European standard EN 71-1.

The sealing performance of the gasket seated between the fuel pressure sensor and the engine fuel delivery pipe could degrade over time. If this occurs, fuel could leak which, in the presence of an ignition source, could lead to a vehicle fire.

The steering damper bracket bolts may have been excessively tightened during assembly. This could cause them to break and interfere with the steering.

Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.

In the event of a high-speed frontal collision, there is a possibility that the lap belt webbing of the seat belts intended for the outboard, second row seats could come into contact with a part of the seat cushion frame, be cut, and separate. If this occurred, the seat belt would not properly restrain the occupant, increasing the risk of injury for the occupant.

The engine tappets and cams can wear, increasing the tappet clearances. If the tappet clearance becomes large, it can, in the worst case, cause the engine to stall.

The wiring harness could become damaged where it is in contact with part of the steering column assembly. If this happened, a short circuit may occur. Potential safety-related consequences include deactivation or malfunction of the windscreen wipers, the headlamps, and/or the horn. Engine stalling may also occur.

The inflator case component within the airbag assembly may rupture during passenger airbag deployment. In the event of an inflator rupture, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.