The amount of nickel released by the silver-coloured, angular beads is too high (measured value 27.5 µg/cm²/week). Nickel is a strong sensitizer and can cause allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.

Direct access to the saw blade while the cutter is in operation poses an acute danger of injury through the loss of limbs, for example. A similar situation also pertains with regard to access to various other machine parts. The product does not comply with the requirements of the Machinery Directive.

The cover of the flashing unit is not sufficiently resistant and may break, exposing users to live parts. The product does not comply with the requirements of the Low Voltage Directive and the relevant standard EN 60598.

The product contains hydroquinone (measured concentration 9.6% by weight). Hydroquinone can cause skin irritation and dermatitis. The product does not comply with the Cosmetic Products Regulation.

One pin of a plug can be inserted leaving the other live pin accessible. The product does not comply with the relevant national standard.

Incorrect routing of the petrol tank vent pipe (it is placed too close to the exhaust pipe) may cause a fire.

There is slack in the locking mechanism for the top box and it may not be completely locked. As a result, the top box could fall off when the scooter is in use, causing a risk of an accident for other road users.

The product contains polycyclic aromatic hydrocarbons (PAH)s, including benzo(a)pyrene (measured value benzo(a)pyrene: 0.2 mg/kg; total of PAHs: 29.5 mg/kg). Some PAHs are carcinogenic. Benzo(a)pyrene is a carcinogenic PAH. The Council of Europe Resolution ResAP (2008)1 on requirements and criteria for the safety of tattoos and permanent make-up, recommends that the level of benzo(a)pyrene (BaP) does not exceed 0.005 mg/kg and the total amount of PAHs do not exceed 0.5 mg/kg. The product does not comply with the relevant national legislation.

The drawstrings in the hood of the sweatshirt and in the waist area of the trousers may become trapped during various activities of the child. A loop can be created and strangulation or injuries to the child may occur. The product does not comply with the relevant European standard EN 14682.

Live parts become accessible when a different sized light bulb is used in the lamp holder. In addition, the clearance between the accessible parts and the lateral contacts of the lamp holder is too small. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60598.